We've moved the blog

 Just in case you're coming here to see our blog, it's moved to our moonracerfarm.com website.  Since Google doesn't play nicely with any other social media platform, we decided to move the blog as well as ourselves.  And since we don't need the jungle lodge website any more, it only made sense to move it over there.  So click the link and follow us on our travels!

Ramping It Up

After a few tries at repairs, we ended up with a new starter.  Once that was installed, the truck started immediately.  Then, our electrical genius friend Dave Gray came over for a play date with Tom, and they tracked down the electrical problem with the lights, and the tail lights are working again, although Tom still didn’t hook up the roofline running lights.  With the truck once again running and road legal, we planned to head over to Koops’ to have the moto ramp installed…and discovered that something is malfunctioning in the air ride system.  This isn’t a show stopper because we had hard rubber stops installed a couple of months ago so that even if the air ride system completely deflates, nothing will rub and the truck is still mobile, but this is next on our list of things to fix before we hit the road.

Despite the faulty air ride system, we took the truck to Koops’.  We thought the installation would take a couple of hours, but since they built it without the truck being at the shop, the guys found a few complications.

Where the ramp meets the truck, it’s pinned in with L-track.

It then folds up and locks in a U-bracket at the roof.  This is an elegant and simple design, but none of us thought about the fact that the roof is eight feet high, and nobody could easily reach the bolt lock to lock it in when it was up.

So, Justin made some changes to the ramp, and to the U-bracket, and to the locking mechanism to make it work.  But it took a lot longer than a couple of hours, and we ended up taking the truck back for another day before it was finally finished.  

We then took the camper back to Angel, where they had removed all of the cabinetry to be sanded, sealed, and varnished.  These guys are true craftsmen and artists, hand sanding all edges to make sure they’re perfect.

When the finish work is done, they will install everything on the framework in the camper.  We then have plans for a table…more on that later…and a hardwood floor.

Fits & Starts…or Fits & Starters

We picked up the camper at the cabinet maker a week ago today, as planned, and brought it home to get a few things done over the weekend before taking it back at the beginning of the week.  It was a great plan, but, if we’ve learned anything doing this project, it’s that while planning makes us feel like we’re in control, we absolutely aren’t.

On Saturday morning, we moved one of the trucks out of the garage so we could pull the camper in so Tom could crawl around on cement instead of dirt and chicken poo while he did some things under the bed.  Tom jumped in to start the truck, and…click.  He checked wires, he checked connections, he had a few friends check wires and connections, he banged on things, he wiggled things, and…click.  We canceled the plans to get the truck back to the cabinet maker, and Tom crawled underneath to take out the starter.  He got all but one bolt removed, and couldn’t make it work, so called super mechanic William, who just happened to be about a half mile from the driveway.  William and his mechanic assistant were in the driveway and under the truck about five minutes later, although it took them over an hour to confirm Tom’s diagnosis and get the stubborn bolt out so the starter could be removed.  Off it went with William, who called the next day and said it was repaired.  Tom zoomed over to William’s shop, picked it up, and came home and put it back on the truck.  He got in the truck, turned the ignition key, and…click.

So, he called William, and got on his moto and zoomed back to William’s shop, where William confirmed it wasn’t working.  It’s still there, and we’re hoping it will be done soon so the truck can move.  The upside to this story is twofold.  First, at least the truck is in the driveway, not parked on a beach somewhere with the tide coming in - although Tom assures me we would NEVER park on a beach where there was any risk of getting caught in a tide.  Second, the truck is in the driveway, so we’ve made good use of the time to get a few things done.  And (I know this makes it threefold, but hey) some of the other parts that are being worked on are where they can still be worked on, so progress isn’t stopped.

The starter and the cursed bolt

The moto ramp, ready to be picked up when the truck can move.

The cabinet doors with handles installed, removed so they can be finished.

The head board for the bed.  We have an 8” mattress, so it’s not really as tall as it looks.

Tom used the time the camper is stuck in the driveway to finish (almost) the compressor box.  This involved a lot of crawling in the dirt and chicken poo to get all the bolts and hoses and wires where they needed to be.

 

We have lights.  Tom replaced all of the old horizontal lights, and hooked up the vertical lights.  The only problem is that even before he did this a fuse keeps blowing so we don’t have any tail lights.  But, since the truck is stuck in the driveway, who cares?  We’ll get it working eventually.

They’re hard to see because they’re small and aren’t hooked up yet, but the running lights along the top rail are installed.  And, er, they wouldn’t work even if they were hooked up because they’re connected to the tail lights.  Oh well.

Just One More Thing…

We picked the camper up at Koops’ last Friday, with just one more thing from the original build list to be completed.  We know we’re going to have a few late add-ons for Koops’ before we hit the road, for things like racks, or holes we’ve realized need to be drilled, but it’s finally ready to get some of the other build details finished.  It’s currently at the cabinet makers’ place, but we’re going to pick it up there on Friday and work on things like electric over the weekend before taking it back to have the cabinets finished.  So exciting!

These three guys have made us really happy…Marco, Nelson, and Justin.  Welders & Wizards!

The moto ramp is the last item being finished at Koops’…but at least we have a plan.  Steps on the left, grooved ramp on the right, and it will fold up and lock at the back of the moto garage.

When down, it will lock to the bed with L-track.  We’re also planning on putting a strip of L-track on the side of the camper so we can attach it there, give it a fold down leg, cover it with a piece of sheet aluminum or wood, and have a nice table!

The door is on in the bathroom, and has a good latch so it can stay either open or closed when we travel.

Over the door is a shelf where we can put bathroom stuff when we shower.  We’ll obviously need a rack, or box, or straps, or something - whatever we decide will be one of the add-ons mentioned above.

Lots of work was done under the bed to add storage and cargo carrying capacity.

This side has, from front to back, a fuel carrier compartment, a compressor garage, a garbage/tool box which was the smoker box when this was a bee truck and is thus sort of stinky, and the spare tire.

The passenger side has, from back to front, a spare tire carrier, a grill compartment which will be outfitted with a gas connection and which is below where we intend to attach the ramp/table, a miscellaneous box, and water storage.

We have two compressors inside this box.  Redundancy!

Two spare tire racks have been added under the bed.  Lockable aluminum belts, which can be seen in the side views above, hold the tires.  We learned a long time ago that two spares are a good thing when driving through Mexico, and we figure this will be especially good with a six-wheeled truck.

The steps now mount inside the door when we travel.

Drawer and cabinet faces are being made now.  These drawers will have beveled edges.  Tom also installed the kitchen faucet, which you can see at the top of the photo.

We met with Angel to discuss handle placement.  The cabinets will all be dismantled and taken into the shop to be finished, but we had to make these decisions while they were in place.

The cushions we had made and covered fit.  We are going to add removable washable cloth covers, but this base cover is faux-leather car upholstery so it should withstand the dogs.  And us.  There is logic behind the slightly higgledy-piggledy look which is too complicated to go into here, but this is exactly what we wanted.

The toilet is installed with a vent tube, and the washer is locked into place with a strap, which will be replaced now that we know the concept works.